Products

Get to know our product line.

CRAMACO® ALTERNATORS

PTO’s Cramaco

THREE PHASE 380V / SINGLE PHASE 220V | 50 HZ | 1500 RPM

The single-phase power it is reduced to 60% of the three phase.
Series:  

Series: G2R 160N

G2R 160N

Models:

SSB/4

CONTINUOUS POWER 125ºC- KVA: 15.00
EMERGENCY POWER 150ºC - KVA: 16.50
REAC. SUBTRANS. XD - CONT: 7.40
REND. 4/4 COS FI 0.8%: 82.00
AVR: AVR2
NET WEIGHT KGS.: 180.00
GROSS WEIGHT KGS.: 0.00
DIM OF PACKAGING (MM): 1120x480x900
TECHNICAL SHEET

SC/4

CONTINUOUS POWER 125ºC- KVA: 20.00
EMERGENCY POWER 150ºC - KVA: 22.00
REAC. SUBTRANS. XD - CONT: 7.60
REND. 4/4 COS FI 0.8%: 85.30
AVR: AVR2
NET WEIGHT KGS.: 210.00
GROSS WEIGHT KGS.: 0.00
DIM OF PACKAGING (MM): 1120x480x900
TECHNICAL SHEET

MB/4

CONTINUOUS POWER 125ºC- KVA: 31.00
EMERGENCY POWER 150ºC - KVA: 34.00
REAC. SUBTRANS. XD - CONT: 9.30
REND. 4/4 COS FI 0.8%: 87.40
AVR: AVR2
NET WEIGHT KGS.: 220.00
GROSS WEIGHT KGS.: 0.00
DIM OF PACKAGING (MM): 1190x480x900
TECHNICAL SHEET

Cramaco®
PTO’s

ACCORDING TO STANDARDS

Generator type G2R CRAMACO®

Specifically designed to be driven with the PTO of existing tractors in the market. It consists of a multiplier to gears in oil bath, coupled to the generator in monoblock (without pulleys), a universal grooved output for power take-off control rods, dashboard with measuring instruments, main electric switch and auxiliary outlet.

The generator should turn at 1500 rpm and this occurs when the PTO is at 535 rpm. In this condition, the nominal voltage (380 V three-phase and 220 V single-phase) is generated at 50 Hz. Optionally it is delivered on an iron frame with holes suitable for fixing with bolts to a concrete base.

  • Connection to 12 terminals can be easily transformed from single phase to three phase.
  • It can be converted to SAE coupling to assemble generator sets by motor coupling (Perkins, Deutz, John Deer, etc.)
  • Waveform that allows powering computers or electronic control and command devices.
  • Exportation quality.
  • Coupling with gearbox avoiding the problematic operation with belts.